MAI COMPANY CONFIDENTIAL FIELD INFORMATION BULLETIN SERVICE GROUP(S): MICRO,MINI,LARGE MFG: OKIDATA NACS TYPE(S): N147 MFG. MODEL(S): 3410 CATEGORY: PRINTER DESC: MATRIX *** TABLE OF CONTENTS AS OF 09/23/96 *** FIB 00001.General Information & Parts Listing.........................12/28/95 PRINTER-OKIDATA-3410--------------------------------Table Of Contents Pg01 of 01 FIB 00001 MAI COMPANY CONFIDENTIAL 12/28/95 *** General Information & Parts Listing *** The following pages are s supplement to the Okidata Pacemark 3410 Maintenance Manual Part Number 59250001. This update is for MAI Systems Corporation Field Service Personnel use only and contains a cross reference to MAI Systems MM part numbers and additional reference numbers not available in the Okidata Pacemark 3410 Maintenance Manual. PRINTER REVISION LEVEL - Pacemark 3410 printers supported by MAI Systems must be Revision Level 'A'. Printer revision level can be identified by the 4th digit in the printers serial number found on the printer ID label located on the rear Main Chassis Assembly of the printer. COMMONALITY TO OTHER PRINTERS - The Pacemark 3410 is a 9 wire printhead version of Okidata 24 wire printhead models; ML393, ML393 Plus, and ML395 printers and it shares many of the same features and spare parts. The 3410 can be supported on most MAI System platforms by using its IBM PPR emulaion and selecting the hosts PT-4226 PDF. PRINTER FEATURES - The 3410 is a 136 column printer capable of 550 cps in High Speed Draft Mode, 417 cps in Utility Mode and 104 cps in Near Letter Quality mode all set at 10 cpi. It has both an RS-232 serial and Centronics parallel interface that is selectable by sliding a metal plate that permits only one interface connector installation at a time. The plate also trips a micro switch that allows the printer to detect and display the selected interface in the printer setup menu. The printer supports Zero-inch Paper Tear Off, forms parking and auto forms loading for bottom, rear and top fed forms. A bottom power push tractor assembly is standard and permits a straight paper path. FIRMWARE - The 3410 supported by MAI Systems must have EI (Epson/IBM) emulation firmware. Okidata also offers this printer with Microline emulation firmware that uses completely different escape codes. Firmware and emulation can be determined by entering the printer setup menu or by printing one of the printer self test printouts. SELF TESTS - Holding down the LINE FEED switch while powering the printer ON enables an 80 column wide 2 page long print style test. The test may be terminated early by pressing the SELECT switch. The first two lines of the printout list; printer model number, printer emulation, firmware revision level and part number. Holding down the FORM FEED switch while powering the printer ON enables a 136 column wide ASCII slant pattern test that will run continuously. Pressing the SELECT switch will end the test. The first two lines of this printout also list the printers firmware description. Example: PM 3410 EI A F/W 01.50 YR4089-3008 = (Pacemark 3410 with Epson/IBM emulation and revision level 1.50) CG 01.31 = (Character Generator firmware revision level 1.31) MENU MODE - Enter Menu Mode by pressing PRINT QUALITY and CHARACTER PITCH switches at the same time. The printer will print 'Menu Mode' and the Control Panel switch functions change to the menu mode functions indicated below them. Press the 'PRINT' switch for a printout of all the present printer Power On default settings. Use the 'GROUP' and 'ITEM' switches to locate the item option to change and use the 'SET' switch until the desired item is printed. Press the PRINTER-OKIDATA-3410--------------------------------FIB001 Pg001 'EXIT' switch to save your changes and leave Menu Mode. The printer will print 'Menu End'. When you press 'EXIT' all options selected become the printer's Power On default settings. FACTORY DEFAULT SETTINGS - To return the 3410 to its factory default Menu Mode settings, power the printer OFF, then hold down the SELECT and LINE FEED switches while powering the printer ON. NOTE: Several serial interface factory settings are not compatible with MAI host systems and will need to be changed. ****** Okidata 3410 Table of Part Numbers ****** IPB ITEM Qty Per MM Part Okidata NO. Oki-J Part Number Description Printer Number Part Number ---- ----------------- -------------------- -------- ------- ----------- 1 2PA4016-4723G31 Middle Cover Assy 1 390500 50212431 2 1PA4094-5837G1 Access Cover Assy 1 390510 50215701 3 1PA4094-5841G1 Rear Cover Assy 1 390520 50215801 4 4YA4043-4280G1 Pull-up Roller Assy 1 390530 50215901 5 4YA4023-1501G1 Printhead 1 390540 50090301 6 3PP4043-2501P1 Platen Knob 1 390550 53478601 7 4YA4042-1511G1 Operation Panel PCBA 1 390560 55061401 (OPML) 8 3PP4043-4339G1 Operation Panel 1 390570 53479101 (Membrane) 9 4YA4042-1512G1 Sensor PCBA (LPRW) 1 390580 55061501 10 4YS4011-4311P4 Sensor PCBA Conn. Cord 1 390590 56616804 11 4LB-192200-5 Spring (Cover Open Lever) 1 390600 50910505 12 4YA4042-1509G11 Main PCBA (CBNP) w/ROM 1 390605 55061611 PROM for Main PCBA 1 390606 13 4YA4042-1510G11 Interface Conn. Assy 1 390610 55061711 (HKTY) 14 4YB4049-1709P1 Power Supply Assy (120V) 1 390615 56411201 15 4YB4049-1278P2 Power Supply Assy 1 390620 56406302 (220/240V Opt.) 16 3YS4011-7912G1 IF-Main PCBA Connection 1 390625 56614901 Cord 17 4YS4011-6295G1 Power Connection Cord 1 390630 56614101 (120V) 18 4YS4011-6253G3 Power Conn. Cord 1 390635 56614801 (220/240V) 19 3YS4011-1026P1 Cord, AC Power 1 390960 56609701 (120V US STD) 20 3YS4011-1265P1 Cord, AC Power 1 390961 56624101 (220/240V Opt.) 21 3YX4043-2550G4 Space Motor Assy 1 390640 56506204 22 3PB4043-4249P1 LF Motor Assy 2 390645 56509401 23 4LP1313-313 Mini Pitch Belt (LF) 1 390650 51304401 24 4PA4043-2556P1 Platen Assy 1 390655 50054101 25 4PP4043-2466P1 Platen Gear A 1 390660 51214501 26 3PP4043-4246P1 Platen Pulley 1 390665 51226801 27 3YX4043-2561G1 Push Tractor Assy (Left) 1 390670 5004501 28 3PA4043-2562G1 Push Tractor Assy (Right) 1 390675 50054601 29 4PP4043-2451P1 Friction Pierce 1 390680 51002301 30 3PP4043-2452P1 Center Guide Upper 1 390685 51002401 31 3PP4043-2453P1 Center Guide Lower A 1 390690 51002501 32 4PP4043-2454P1 Center Guide Lower B 1 390695 51002601 33 4YX4043-2751G1 Micro Switch Cable Assy 1 390700 56614301 (Cover Open) 34 3PB4043-4204P1 Micro Switch Cable Assy 1 390705 56624801 (Adj & Release Lever) 35 4LB-193400-1 Spring (Paper Chute) 2 390710 50907502 36 3PP4043-2456P6 Release Lever 1 390715 53478706 PRINTER-OKIDATA-3410--------------------------------FIB001 Pg002 37 4PP4043-2460P1 Release Lever Guide Block 1 390720 53478801 38 4PB4043-2754P1 Detent Spring (Release 1 390725 50910201 39 4YX4043-2576G1 Sensor Assy (Cut Sheet) 1 390730 56625001 40 4PP4043-2458P1 Idle Gear 1 390735 51214401 41 4LB-190600-6 Spring (Idle Gear) 1 390740 50910305 42 4PP4043-2456P1 Drive Gear A 1 390745 51214201 43 4PP4043-2457P1 Drive Gear B 1 390750 51214301 44 4PA4043-2584G1 Ribbon Feed Assy 1 390755 50054301 45 4PP4043-2628P1 Spring, Bail Arm (Left) 1 390760 50910701 46 4LB-193100-2 Spring, Bail Arm (Right) 1 390765 50910801 47 3PB4043-2601P1 Stepper Motor Assy (Bail 1 390770 56506301 Motor) 48 5LR-193134-1 Idler Gear, Bail Arm 1 390775 51210201 49 3PP4043-2504P1 Adjust Lever, Forms 1 390780 53478401 Thickness 50 4PA4043-2711G1 Indicator Shaft Assy 1 390785 50054401 51 3PP4043-2509P1 Bail Arm (Left) 1 390790 53478501 52 3PP4043-2510P1 Bail Arm (Right) 1 390795 53478502 53 3PP4043-2764P1 Bail Open Cam 1 390800 51214701 54 4PB4044-1492P3 Belt, Mini-pitch, Space 1 390805 51303101 Motor 55 3YX4043-4232G1 Printhead Cable Assy 1 390810 56624901 56 4PP4043-4241G1 Ribbon Guide Assy 1 390815 53062601 57 4PA4043-4235G1 Ribbon Protector Assy 1 390820 53062701 58 3YX4043-4228G1 Interlock Switch Assy 1 390825 56212601 59 4YX4043-4219G1 Cooling Fan 1 390830 56509501 60 4PP4043-4243P1 Ribbon Protector Screw 2 390835 50316701 61 4PP4043-2507P1 Eccentric Collar 2 390840 50703701 62 4PP4043-2565P1 Carriage Shaft 1 390845 51110301 63 4LP-5466-36 Sumi Ribbon Card (Ribbon 1 390920 56628402 cable) 64 4PA4043-2684G2 Tractor Assy, Bottom Feed 1 390850 50057402 (Left) 65 4PA4043-2685G2 Tractor Assy, Bottom Feed 1 390955 5007502 (Right) 66 4PP4025-2653P1 Sheet Guide, Bottom Feed 1 390860 51002201 67 4PP4043-4283P1 Drive Pulley, Bottom Feed 1 390865 51226901 68 4LP-1313-59 Belt, Mini Pitch (120 1 390870 51304501 teeth) 69 2PA4094-6159G1 Front Door, Bottom Feed 1 390875 53063701 70 4PP4043-4300P1 Tension Spring, Bottom 1 390880 50922001 Feed 71 4YA4042-1513G1 BTFD (Bottom Feed) PCBA 1 390885 55066101 72 N/A Drive Roller 1 N/A N/A 73 3PA4016-4722G4 Pull Tractor Cover Assy 1 390980 50212601 (Option) 74 4PA4043-2684G1 Pull Tractor, Left (Opt.) 1 390981 50057401 75 4PA4043-2685G1 Pull Tractor, Right (Opt) 1 390982 50057501 76 2YX4043-4230G1 Carriage Frame Assy 1 390895 53349501 77 Idle Pulley, Carriage Blt 1 390900 78 Shaft, Idle Pulley 1 390905 Carriage Belt 79 4PB4043-2579P1 Cut Sheet Guide Assy, 1 390910 51007601 Platen 80 109P0824F4021 Fan, Power Supply (Not 1 390915 Shown) 81 Guide Shaft, Push Tractor 1 390925 (Round) 82 Drive Shaft, Push Tractor 2 390930 (Square) 83 Adjust Indicator, Forms 1 390935 Thickness PRINTER-OKIDATA-3410--------------------------------FIB001 Pg003 84 Bracket, Idle Pulley 1 390940 (Space Belt) 85 Spring, Idle Pulley 1 390945 (Space Belt) 86 400936-010 Bottom Push Tractor Assy 1 390950 NOTE: Column titled "IPB ITEM NO" refers to the Item number in the Illustrated Parts Catalog section of the Service Manual. ORIGINATOR: Mike Ramunni/Norm Jones PRINTER-OKIDATA-3410--------------------------------FIB001 Pg004