MBF COMPANY CONFIDENTIAL FIELD INFORMATION BULLETIN SERVICE GROUP(S): MICRO MFG: PERSYST NACS TYPE(S): N073 MFG. MODEL(S): MULTI-FUNCTION CATEGORY: PC ADD-IN BOARDS DESC: MEMORY *** TABLE OF CONTENTS AS OF 12/20/90 *** FIB 00001.RAMPAK PROGRAMMABLE LOGIC ARRAY.............................07/28/87 PC ADD-IN BOARDS-PERSYST-MULTI-FUNCTION-------------Table Of Contents Pg01 of 01 FIB 00001 07/28/87 *** RAMPAK PROGRAMMABLE LOGIC ARRAY *** TECH TALKS PERSYST MICRO PRODUCTS RAMPAK The PERSYST TIME SPECTRUM Module with RAMPAK requires a specific memory addressing PLA (programmable logic array) based on the PC module and memory capacity of the system. If your PERSYST RAMPAK was attached to your TIME SPECTRUM board at the factory, a special PLA for the IBM PC or XT (256KB motherboard) was installed on the Time SPECTRUM. (That PLA has a brown dot and green dot on it). If that PLA is incorrect for your system according to the table below, insert the PLA (two green dots, shipped in your TIME SPECTRUM package) in your TIME SPECTRUM board according to instructions given in the RAMPAK INSTULLATION GUIDE, Section 5.1. If your RAMPAK is not attached to a TIME SPECTRUM board when you receive it, two PLAs are attached to RAMPAK. Select the correct PLA from the table below based on your model of IBM PC and install the PLA following the instructions given in the RAMPAK INSTALLATION GUIDE, Section 5.1. ------------------------------------------------------------------- 16-641C ORIGINAL PC XT PC X ORIGINAL PC with 64-256K with with PC Exp Box New PC 128KB 256KB -------------------------------------------------------------------- Max Memory 544KB 640KB 640KB 640KB 640KB Supported System 64KB 64KB 256KB 128KB 256KB Board Mem Max Additional 484KB 576KB 384KB 512KB 384KB Memory PLA to Use Green/ Green/ Brown/ Green/ *Brown/ . (Dot Colors) Green Green Green Green Green * PLA used on TIME SPECTRUM/RAMPAK (assembled) shipped from factory. ORIGINATOR: J. HILL PC ADD-IN BOARDS-PERSYST-MULTI-FUNCTION-------------FIB001 Pg001